Cadillac 2006 Spezifikationen PDF herunterladen (Seite 321)

100

101

The vehicle should be properly prepared as follows:

• The vehicle should be placed so the headlamps

are 25 ft. (7.6 m) from a light colored wall or

other ﬂat surface.

• The vehicle must have all four tires on a level

surface which is level all the way to the wall or other

ﬂat surface.

• The vehicle should be placed so it is perpendicular

to the wall or other ﬂat surface.

• The vehicle should not have any snow, ice,

or mud on it.

• The vehicle should be fully assembled and all other

work stopped while headlamp aiming is being

performed.

• The vehicle should be normally loaded with a full

tank of fuel and one person or 160 lbs (75 kg)

sitting on the driver’s seat.

• Tires should be properly inﬂated.

• The spare tire is in its original location in the vehicle.

Headlamp aiming is done with the vehicle’s low-beam

headlamps. The high-beam headlamps will be correctly

aimed if the low-beam headlamps are aimed properly.

To adjust the vertical aim, do the following:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Find the aim dot on the lens of the low-beam

headlamp.

3. Measure the distance from the ground to the

aim dot on the low-beam headlamp. Record

the distance.

4. At the wall or other ﬂat surface, measure from the

ground upward the recorded distance from Step 2

and mark it.

5-51

Information Provided by:

1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 433 434

Kommentare zu diesen Handbüchern

Keine Kommentare

Cadillac 2006 Spezifikationen Seite 321

Kommentare zu diesen Handbüchern