Cadillac 2011 SRX Bedienungsanleitung Seite 438

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 498
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 437
Black plate (100,1)
Cadillac SRX Owner Manual - 2011
10-100 Vehicle Care
6. Remove the following fuses:
BCM 1, BCM 2 and BCM 3.
The START/STOP switch LED's
will be off. See Instrument Panel
Fuse Block on page 1049.
7. Close the drivers door.
Notice: If the vehicle is
towed without performing
each of the steps listed under
Dinghy Towing, the automatic
transmission could be damaged.
Be sure to follow all steps of the
dinghy towing procedure prior to
and after towing the vehicle.
Once the destination has been
reached:
1. Shift the vehicle to P (Park).
2. Reinstall the BCM fuses.
See Instrument Panel Fuse
Block on page 1049.
3. Disconnect the vehicle from the
tow vehicle.
Notice: Too much or too
little fluid can damage the
transmission. Be sure that
the transmission fluid is at the
proper level before towing with
all four wheels on the ground.
Notice: Do not tow a vehicle
with the front drive wheels on
the ground if one of the front
tires is a compact spare tire.
Towing with two different tire
sizes on the front of the vehicle
can cause severe damage to the
transmission.
Dolly Towing
(All-WheelDrive Vehicles)
All-wheeldrive vehicles should not
be towed with two wheels on the
ground. To properly tow these
vehicles, they should be placed on
a platform trailer with all four wheels
off of the ground or dinghy towed
from the front. See Dinghy Towing
earlier in this section.
Dolly Towing
(Front-WheelDrive Vehicles)
To tow the vehicle from the front
with the rear wheels on the ground,
do the following:
1. Put the front wheels on a dolly.
2. Move the shift lever to P (Park).
See Shifting Into Park on
page 922.
3. Set the parking brake.
Seitenansicht 437
1 2 ... 433 434 435 436 437 438 439 440 441 442 443 ... 497 498

Kommentare zu diesen Handbüchern

Keine Kommentare