Cadillac 2007 Escalade Bedienungsanleitung PDF herunterladen (Seite 438)

Notice: If the jumper cables are connected or

removed in the wrong order, electrical shorting

may occur and damage the vehicle. The repairs

would not be covered by your warranty. Always

connect and remove the jumper cables in the

correct order, making sure that the cables do

not touch each other or other metal.

A. Heavy, Unpainted Metal Engine Part or

Remote Negative (−) Terminal

B. Good Battery or Remote Positive (+) and

Remote Negative (−) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both

vehicles do the following:

1. Disconnect the black negative (−) cable from

the vehicle that had the bad battery.

2. Disconnect the black negative (−) cable from

the vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the remote positive (+) terminal cover,

if equipped, to its original position.

All-Wheel Drive

Transfer Case

If your vehicle is equipped with All-Wheel Drive,

be sure to perform the lubricant checks described

in this section. There are two additional systems

that need lubrication.

When to Check Lubricant

Refer to the Maintenance Schedule to determine

how often to check the lubricant. See Scheduled

Maintenance on page 517.

Jumper Cable Removal

438

1 2 ... 433 434 435 436 437 438 439 440 441 442 443 ... 569 570

Kommentare zu diesen Handbüchern

Keine Kommentare